> the kernel level. Still, for mountd the use is limited, you can, of course > implement a source routed mount request to mountd, using strict routing, > and it might be relatively easy to obtain a filehandle, however this will MIGHT be?! First of all, let's get something straightened out here. A strict source route is one wherein the packet follows EXACTLY the route specified in the options field of the packet, or gets tossed. A loose source route is one that allows the packet to use any number of intermediate routers and gateways, as long as the packet goes sequentially through each hop specified in the loose source route. "Using strict routing" doesn't make much of a difference in this scenario, except that it limits what hosts you can hit (if it'll work at all with strict routing... I've never tried it) because of the limited space in the options field of the IP header. A loose source route will serve a hacker's purposes just fine, Thank You Very Much. And as long as the system in question will accept a source routed packet and respond (as Net/2 based code should, and the RFC states) with the inverse of the route, you WILL get a file handle. The whole process of getting a file handle in NFS relies on address-based authentication. Once you put yourself in a position where you determine the route that your target's packets take, addresses cease to be trustworthy. As for the real-world feasibility of the attack, the tools to do this exist and are floating around. It isn't particularly hard to do, either... as long as you know the concept behind it, it's all pretty much common sense. > not always give you file access, at times, it gives you read access, I suggest you go take a look at the RFC for NFS. The entire system is BASED on the file handle. The nfs daemon SPECIFICALLY does not do authentication... I believe (I don't have the RFC sitting in front of me at this moment) that the system is arranged so that authentication is seperated from the gritty file i/o stuff, so that different authentication systems can be arranged. If you have the file handle of the exported filesystem you want to attack, you have every bit of access that the legitimate NFS clients have. If the legit NFS clients have read only access, yeah, there's no way I know of to get around that... but otherwise, you're good to go. > at times no access at all. If 2049/udp is filtered in the router, > you can still send an "unlink" requests, and cause damage, however > you can't retrive data because no reply is sent to you. Huh? If the port the nfs daemon is talking on is filtered at the router, unless the attacker can find a way to get around that filter (which depends on how the router is configured), said hacker is shit out of luck. Without any way of communicating with the nfsd, "unlink requests" aren't going to get through. Of course, the nfs daemon communicates through UDP... and UDP is Real Real Easy to spoof. If your router will allow certain packets (ANY packets, in fact) through whatever filtering mechanism you have set up, you've got a potential vulnerability... BUT... An "unlink request" (as you put it) still requires a valid file handle (what inode are we addressing here?). If you have an EXTREMELY determined assailant on your hands, you have a potential problem in that there's a limited number of possible file handles for a filesystem to have, and if someone tried hard enough, they'll EVENTUALLY come across the right one. I've never done it. It can definitely be done, but I don't even KNOW of anyone who will actually sit and try to guess file handles. It'd be pretty trivial to write up a program that would continually send unlink RPC's with guessed handles, though... nohup it, stick it in the background on a secured system, and let it run for a few months, and see how much trouble it causes. Of course, if the mountd isn't appropriately secured, guessing file handles ceases to be a problem. Of course, if the mountd isn't appropriately secured, why waste time with unlink requests when you can just bust out with "rm *"? > For a mount client to implement source routed mount requests you'd > probably have to rewrite all the RPC libs and replace clnt_create() & > clnttcp_create(). Bah. Been there, done that. Make a dummy interface, assign it the IP of the address you want to spoof. Rewrite clnttcp_create() to make source routed connections (actually not all that necessary, since source routed clnttcp_create functions have been written and are floating around already), source route a connection through an intermediate hop host on your LAN to your target host. Have a static route set to your dummy interface on that hop host, and your target will (if it's source routing works) think it's talking to whoever you want it to think it's talking to. Source routing is A Big Deal. --------------------------------------------------------------------------- asriel@wookie.net